Aon Series (55 topics)

arrow_downward
Moderator's Avatar
Q#1 - Is the 30" recommended height for the BRX's (as front L/R) purely to line up the tweeter in line with ear level. Or is there a different...
Moderator's Avatar
Hi everyone! I am looking to purchase the BRX for desktop/nearfield usage. The speaker placement would be each 1.2m from my sitting position in a...
Moderator's Avatar
Would you recommend Super Sub X? Stereo configuration (from manual)? Or should I look for a receiver w/LFE connector? "Left and Right Line-Level...
rjohn79395's Avatar
Hello all. I was just posting here in the hopes of getting some good advice on what a good speaker stand would be to use with the BRX speakers. I...
Davecactus's Avatar
Hi, first time on this board. (Posted in Triton area, but maybe under AON series is a better spot) I am looking to upgrade my SC77 Pioneer elite AVR...
Ghost223's Avatar
Have 3 BRX that will be sitting on vti rf stands but unsure how to use the blu tack. Do I remove the rubber feet from the bottom of the BRX?
2AnalogEars's Avatar
Hi, I am seriously considering the BRX and SuperCenter Reference speakers as LCR speakers in my current setup. The room size is 12 ft. x 18 ft. and...
Aburguy's Avatar
Hey folks question here. I recently got Triton Fives for my front left and right, and the super Center Xl for the Center. I want to replace my rear...
Moderator's Avatar
Being on speaker stands have not been nice to my Aon 3s cloth grills and bottom caps. As a result of me I have tears on the grills and scuffs on the...
mbroadus's Avatar
Just saw this on hometheaterreview.com Looks awesome. GoldenEar has announced that it will be giving demos of its new Bookshelf Reference X (BRX)...
Em84's Avatar
Wasn’t sure where to put this, looks awesome though......www.soundandvision.com/content/goldenear...ve-speaker-prototype. Might...
antimalware's Avatar
Is there any plan to upgrade the Aon 3 with the new crossover treatment and drivers that the Triton Two+ and Triton Tree+ got?
rjohn79395's Avatar
Hi, I just bought the BRX speakers and plan to use them as surround speakers. What I cannot find in the manual is the recommended crossover...
Legolas30's Avatar
Hello, Has anyone replace their aon 3 tweeter my aon 3 tweeter is defective and the other is low going defective also. Anyone experience this issue with aon 3 tweeter.
Vectra's Avatar
Would Aon 3 be a good HT speaker (vs. the GE Sound bar or on wall speakers) for sides inside an entertainment cabinet as shown below? They would fit...
WayneWilmeth's Avatar
Hello, I recently received a pair of Aon 2's and was wondering what amplifier would work well with them? Should it have more than 50 watts per...
tylerhawes's Avatar
Does anyone have a good suggestion for an articulating wall mount that will hold the weight of the Aon 3's and allow them to be angled down? I would...
Moderator's Avatar
I'm wondering if the Aon 3 works well in horizontal orientation? I know some speakers are designed to control vertical dispersion, so that turning...
imahawki's Avatar
I need to put Aon2's on stands. I'm thinking either Sanus Steel Foundation or Pangea LS200. I don't feel comfortable just setting them on stands...
Dark's Avatar
I have some elbowroom to upgrade my current office system. I have to ask, in a surround based system. Will the Aon2 (especially if mounted closer to...
arrow_upward
menu
close
Menu
person_outline
arrow_back
You are here: Home Forum Support Aon Series