arrow_downward
WayneWilmeth's Avatar
Hello GoldenEar Team, Can you please share the music or content test tracks or CDs you use for tuning or testing Triton Three and SuperSat 50...
georgemrvossr's Avatar
Are there any precautions that have to be taken when connecting the Triton 2's to a Pass Labs amp? In the owners manual of the Pass Labs amp it...
rgallos's Avatar
Question regarding impedance settings. Assuming the nominal impedance of the Triton ones is 8 ohms(but can drop down to 4 ohms), I'm wondering what...
Moderator's Avatar
In the LA area we have had our share of power outages. I heard when the electric power comes back up there is a huge power spike/surge which could...
anthem's Avatar
I was going to go with the 12 gauge (unless that overkill) as I have to wire a 7.1 system and have two external house speakers. Any thoughts as their...
anthem's Avatar
I noticed everyone talks about "setting speakers to large" etc. My integra 40.1 doesnt have that option? Any advice on setting them up with the...
Moderator's Avatar
I have recently purchased the Triton Two's, Supersat 3 (4 of them), and your SuperCenter XL to replace my old system. I have a Onkyo txnr 1007 AV...
Moderator's Avatar
Hi guys, I'm a proud new owner of an awesome TritonCinema Three system! I'm no audiophile by any means (I'd consider myself an audio 'noob'), and I...
Moderator's Avatar
Howdy folks, I'm about to purchase some SS60s to mount as left/right for a screen that'll be anywhere from 110" to 115". From what I have been...
Moderator's Avatar
I currently have on order a setup of the following:; One SC 3D Array Two Supersat 3 One Forcefield 3 Subwoofer Will be hooking it up in a small...
Utftballfan's Avatar
I want to connect my new SuperSats with good quality speaker wire. Is there really a difference between $5 wire and $500 wire?
Moderator's Avatar
Hi - Will be running Aon3's for L/R and an SS50C center - SS3s for surrounds. How to best wire the FF4? Use LFE or speaker connection (or both)...
Moderator's Avatar
Hello again.. im still figuring out why my triton 2 dont have much bass. I tried setting all my speakers at 120hz crossover excluding triton 2 set at...
Moderator's Avatar
I have noticed a considerable improvement in bass response using the LFE connection compared to the speaker cable only connection in my Triton Two's....
Moderator's Avatar
I have a Sony Receiver Model STR-DH720. It has a mode called A.F.D. Auto. It generates a low frequency signal output to the subwoofer when there is...
bmwrick's Avatar
well its still in the mail but i have a peachtree nova on the way im planning on using to power my Aon 3's and I was just wondering if anyone has beat...
Moderator's Avatar
Just purchased Triton 2s hooked up to Integra DTR 50.2. When I run Audyssey, it says to first lower the sub output to 75db. Even turning the sub...
Moderator's Avatar
Trying to get the set-up correct for my recently recieved Tritons and 50c Center. I have read earlier that I should have my reciever (pioneer...
Moderator's Avatar
I know that your Triton Two's and your Sat 5 and 3's have remarkable dispersion patterns, but is there an ideal range of listening distances for...
arrow_upward
menu
close
Menu
person_outline
arrow_back
You are here: Home Forum Getting Started Basic Hookup and Wiring Questions