Hello every one. Just a quick thought. I am using the yamaha amplifier with pre out. i have been using speakers cables during stereo listening with no outboard sub. Bass is very low may be my yamaha amplifier is not sending as much information through speaker cables. Then i setup like this, speaker cables from my amplifier to both triton 2 and the pre out of respective front channels through RCA cable to the LFE input of the speakers at the back. Wow.. Bass is there . All of those information i was missing is there now. My only concern is that is this the safe connection? I am gettin the hiss on one of the speaker but i think that is due to the wire is used. Overall i need ur suggestions on this. Please guide. Thanks

No, not correct connection. Something is incorrect in your bass management or other settings. Seek support from Yamaha. If you want help here, provide a full listing of the bass management and speaker settings you are using. Otherwise there's nothing we can tell you other than you've done something wrong.

I am using very simple setting for stereo. Just speaker wires from yamaha to tritons. Speakers set to LARGE. And sub to yes. Even in pure direct mode of yamaha i am not getting the enrich bass.. Pure direct bypasses all of the settings of yamaha and feed the signals direct to speakers which are set to large and should handle all of the frequencies. Inspite of all of these settings i tried pre out and i 've shared the results with u. My concern is the speakers safety and technically know how of the triton build which u the manufacturer only have. By the way what is wrong witn pre out to tritons technicaly? For the time being i am not using pre out till u give me green signal.

No, no, that won't hurt anything, its just not right.

There is nothing "very simple settings for stereo" when it comes to a modern home theater receiver, I suggest you have missed something(s) in one or more of the many setup menus.

When the connection is just speaker wire shouldn't the settings be large and sub=no? I was doing something similar with my old Marantz and once I did that, bass was great with just speaker cable.

Melvin Boule wrote: When the connection is just speaker wire shouldn't the settings be large and sub=no? I was doing something similar with my old Marantz and once I did that, bass was great with just speaker cable.

Yes. There's is a "but" though, take a read through Sandy's Setup Tips for more on this issue.