I was in love with GET speakers the first day I auditioned them last year and since then I am slowly building my dream 7.2.4 setup. As of now I have 5.2.2 setup in my media room and just testing the 2 Polk T15 as upfiring dolby atmos speakers until I replace them with GET in-wall. I need some advice with crossovers and if there is anything else that I should try to get the best sound from my HT

Here is my setup
Denon x6200W Receiver powering surround and two atmos speakers
Emotiva XPA-5 (Gen 2) powering LCR
T2+ left and right, setup as FULL range, connected through speaker wire and LFE, bass level dialed at 11 O’clock
SuperCenter XXL center, setup as small, crossover 80Hz
SuperSat 50 rear surrounds, setup as small, crossover 80HZ
Polk T15 at 25 degree angle for atmos, setup as small, crossover 80HZ
Bass crossover is set at 80HZ

My room is about 19’ (projection wall side) by 28’, and I am attaching few pictures

Hi. Only thing I see is the SuperSat 50 should have a 100-120Hz crossover. Not sure what the sub crossover is all about, if it is LFE it should be set at 120Hz. (Don't know what the Polk height channel's should be, of course.)

I changed the setting as suggested and definitely feel that it made it sound better, SuperSat are more full now. I am getting very solid punch bass when playing blu-ray through blu-ray player but I feel like I am getting too much bass when I play files through my HTPC...shall I look for settings in HTPC to lower the bass or play with the LFE Crossover on receiver?