file Surge protection & RF-EMI filters for Triton Ones?

  • MickeyBoy's Avatar Offline school
  • New Member
  • New Member
    • Posts: 7
    • Thank you received: 8
  • arrow_drop_downMore arrow_drop_upLess
MickeyBoy Posted 9 years 3 months ago
#10067
There have been a number of thunderstorms recently. I have been pulling the plugs on my Ones but would like better protection...if it does not negatively affect sound quality. I don't really know how Class D amplifiers work, but I imagine that the Ones might soak up a lot of power. If true, this would affect any kind pf protective device placed upstream of the speakers.

Any thoughts on this subject?
The following user(s) said Thank You: WayneWilmeth, T Cobe

Please Log in or Create an account to join the conversation.

  • Moderator's Avatar Offline
  • Moderator
  • Moderator
    • Posts: 3350
    • Thank you received: 3419
    • Karma: 19
  • arrow_drop_downMore arrow_drop_upLess
Moderator Posted 9 years 3 months ago
#10068
Discussed in other threads on this forum, but the short answer is you do not need additional filtering or protection. If you feel you must, you can use the average max continuous power consumption when choosing a device - about 600 watts on a Triton One. In terms of sonic degradation, shouldn't be an issue s long as the device does not introduce any noise into the circuit.
The following user(s) said Thank You: WayneWilmeth, T Cobe, MickeyBoy

Please Log in or Create an account to join the conversation.

  • ArthurDaniels's Avatar Offline
  • Platinum Member
  • Platinum Member
    • Posts: 917
    • Thank you received: 1811
    • Karma: 1
  • arrow_drop_downMore arrow_drop_upLess
ArthurDaniels Posted 9 years 3 months ago
#10070
Each of my two Triton Ones is plugged in to a surge protector with backup battery capability (although the batteries no longer hold a charge, thus I am utilizing only the surge protection capability in the units). I have experienced no issues with hum or any other noticeable sound impairments.

Best,

Art
The following user(s) said Thank You: WayneWilmeth, T Cobe, MickeyBoy

Please Log in or Create an account to join the conversation.

  • twinturbo11's Avatar Offline
  • Senior Member
  • Senior Member
    • Posts: 73
    • Thank you received: 87
  • arrow_drop_downMore arrow_drop_upLess
twinturbo11 Posted 9 years 2 months ago
#10222
Dear Mod, can something like this degrade or affect slightly the sound? :

www.amazon.co.uk/electronics/dp/B000PS57...=8-2&keywords=tacima
HTR7000 7.1.2 ATMOS setup
Marantz SR7011 Atmos Receiver
Nvidia Shield 4k Media Player
Sonos Connect
Sony PS4 Pro
Laser 4k Projector (soon)
Elite 150" motorized screen
The following user(s) said Thank You: WayneWilmeth

Please Log in or Create an account to join the conversation.

  • murphyslaw1978's Avatar Offline
  • Elite Member
  • Elite Member
    • Posts: 179
    • Thank you received: 337
  • arrow_drop_downMore arrow_drop_upLess
murphyslaw1978 Posted 9 years 2 months ago
#10258

Moderator wrote: Discussed in other threads on this forum, but the short answer is you do not need additional filtering or protection. If you feel you must, you can use the average max continuous power consumption when choosing a device - about 600 watts on a Triton One. In terms of sonic degradation, shouldn't be an issue s long as the device does not introduce any noise into the circuit.


Wouldn't the max draw on the amp be higher given that the RMS amplifier power is probably a lot more than 600 watts?
7.1 today, moving to 7.1.4 tomorrow
(2) Triton Two - front mains
(1) Sat 60C - center
(2) Sat 50s - sides
(2) Sat 50s - rear
(2) DIY 18" Stereo Integrity subs, 1100w each
The following user(s) said Thank You: WayneWilmeth

Please Log in or Create an account to join the conversation.

  • Moderator's Avatar Offline
  • Moderator
  • Moderator
    • Posts: 3350
    • Thank you received: 3419
    • Karma: 19
  • arrow_drop_downMore arrow_drop_upLess
Moderator Posted 9 years 2 months ago
Last edit: 9 years 2 months ago by Moderator. info_outline
#10260

twinturbo11 wrote: Dear Mod, can something like this degrade or affect slightly the sound? :

www.amazon.co.uk/electronics/dp/B000PS57...=8-2&keywords=tacima


Probably OK for your other hifi gear, may not be appropriate for Tritons though due to power rating.

Please Log in or Create an account to join the conversation.

Moderators: Moderator
menu
close
Menu
person_outline
arrow_back
You are here: Home Forum Getting Started Basic Hookup and Wiring Questions Surge protection & RF-EMI filters for Triton Ones?