Invisa Series (182 topics)

arrow_downward
Moderator's Avatar
I installed four HTR-7000s as top fronts and top backs and also bought two HTR-8000s thinking I was going to install them in my kitchen, but that may...
Moderator's Avatar
Hello all, I just moved from a house with a dedicated theater to a much smaller space. There is no dedicated theater so trying to make do. The...
Moderator's Avatar
file HTR 8000 for ATMOS
attach_file
Currently in the process to replace my ATMOS speakers with the HTR 8000. I am planning to follow the Dolby DTS specifications for the speakers...
wesg92's Avatar
Hello, What is the formula for calculating distance needed from MLP for HTR-7000s sound to appear at ear level? I currently have 4 HTR-7000s for...
Moderator's Avatar
I'm buying an external amp. I normally listen at -12db How much watts of power does each Invisa HTR7000 need Also same Q for SuperSat3, SuperSat50,...
Moderator's Avatar
I am looking for in-wall speakers that angle 30-45 degrees to aim from the wall to the MLP for both front-wide, and for rear-surround. I am...
Audiguy3's Avatar
I’m looking for suggestions on Atmos speakers. The room is really large at 20x20 but I have 120” projection and screen. My current setup is:...
Doctor J's Avatar
I have two questions about speaker setup before running Dirac. System (5.1.4): Invisa SPS x2 and SuperCenter reference in the front, Invisa MPX x2 in...
Moderator's Avatar
Hi there. I'm looking for some advice on the settings to use for room correction systems like Audyssey and Dirac in combination with the Invisa...
wesg92's Avatar
Hello, I currently have 4 650s for my Atmos speakers, however I feel like I'm not getting the true experience of Atmos from them due to where they...
Moderator's Avatar
I am slowly filling out my HT system and am wondering what my best options for side surrounds are and if I use MPX, where in relation to two rows of...
ssukov78's Avatar
1. Room is 21 W x 23 L x 9 H. 2 rows. I have wiring for 9.2.6 atmos, but since those are directional will I have problems using 6 HTR, better to live...
rjohn79395's Avatar
Hello! My home is prewired for 5.1 in-ceiling speakers. I think I'm going to skip on the LCR in-ceiling, and eventually go in-wall. In the...
acoward's Avatar
I was planning on building a 5.1 system using SuperSat speakers (60c + 60 for L & R). Realizing my center speaker would look better built-in, is it...
Drewcwsj's Avatar
How do I install HTR7000 and Invisa 650 in my Woodhaven is MDF planks hung on aluminum track. The track will be screwed to our existing drywall...
Doctor J's Avatar
Hey folks, hoping to pick your brains. I just moved into a new house and want to fulfill a dream of creating a home theater. The den is about 22 x...
Darren's Avatar
My room is 16' wide by 18' deep and the perimeter ceiling height is 7'10" tall. Half the back wall is open to the rest of the house. The ceiling is...
Moderator's Avatar
We have an open family room that is 20 foot long and 15 foot wide with 10 foot ceilings.. We have almost all windows on the right and back side walls...
waja's Avatar
Someone else must have gone through this. The boxes are in the walls, drywall is up over them. Soon I'll be priming and painting, and installing...
waja's Avatar
I am starting on building an HT in an existing room. The room is 12x16. One wall had openings into the adjacent hall with 13x13 columns. I closed off...
arrow_upward
menu
close
Menu
person_outline
arrow_back
You are here: Home Forum Support Invisa Series