hello all so I have been using an older (pre HDMI) Denon 3805 and Just upgraded to a Anthem MRX1120.

Using Triton 3+ and XL center . Running a 5.1 livingroom .

I ran ARC and it set my 3+ at 250 HZ crossover ( so changed that to None)

I still have to tweak and learn the AVR but I am Not blown away by the upgrade as i hoped to be .

Any suggestions with Tritons and Anthem ?

Antman27 wrote: hello all so I have been using an older (pre HDMI) Denon 3805 and Just upgraded to a Anthem MRX1120.

Using Triton 3+ and XL center . Running a 5.1 livingroom .

I ran ARC and it set my 3+ at 250 HZ crossover ( so changed that to None)

I still have to tweak and learn the AVR but I am Not blown away by the upgrade as i hoped to be .

Any suggestions with Tritons and Anthem ?

I found the room to have a lot of interaction with arc. MRX 720
I get outstanding results, with arc run at 500hz. No x over for triton 2’s. It took me several months to learn arc.
I started out with 2 channel, ran quick curve, then used mic to experiment.
Created 4 curves. 2 channel, movie, music, arc off.

Ran all positions eventually, then used an analog spl meter to tweak to my liking.

Hope that helps.