- home Forum
- arrow_forward
- Support
- arrow_forward
- Triton Series
- arrow_forward
- I am looking to upgrade
I am looking to upgrade
- Offline school
- Junior Member
- Posts: 21
- Thank you received: 10
- arrow_drop_downMore arrow_drop_upLess
miamifins
Posted
6 years 6 months ago
I have the supersat 50 as my center speaker. I have Triton 2 as my front 2 speakers and I guess the sat 50 as rear. (they are small and were the cheapest at the time) I am looking to upgrade my center speaker first. Then a sub woofer. Then amp. The center speaker distorts when loud bass comes from the center channel. This is not often and not a big deal, I just wanted to get a center that can handle bass. I got my speakers in 2012 and LOVE my Triton 2's. I was thinking the XL? Next, the the sub woofer. I listened to the system for about a year without my sub in the rear of the room. Bass was good but it did not have the same punch my old system had. I turned on my Yamaha woofer from 2000 and bam! I had that base punch next to me,again. Literally, The sub is next to the sweet spot. Where I sit. I want to stay with GolenEar. Is there any one sub that is better for close range? That is what I was missing from the Tritons. Am I doing something wrong or do most of you have an additional sub (or two)
Lastly, I do not have a high end receiver. I had a $1200 Onkyo that was crap and went out. I'm using a $600 Sony STR-DN1040 from a few years back.
Lastly, I was reading some threads and looking at some set ups. I am not rich. Just an ordinary average guy. The kind of guy, the wife yells at when they by expensive stereo stuff.
Thanks in advance for any suggestions
Lastly, I do not have a high end receiver. I had a $1200 Onkyo that was crap and went out. I'm using a $600 Sony STR-DN1040 from a few years back.
Lastly, I was reading some threads and looking at some set ups. I am not rich. Just an ordinary average guy. The kind of guy, the wife yells at when they by expensive stereo stuff.
Thanks in advance for any suggestions
Please Log in or Create an account to join the conversation.
- Offline
- Platinum Member
- Posts: 4595
- Thank you received: 7040
- Karma: 15
- arrow_drop_downMore arrow_drop_upLess
WayneWilmeth
Posted
6 years 6 months ago
Hi Miamifins (I really hope they are good this year!),
Good questions and this is the place to ask them.
I would totally go with the XL or even the XXL center channel speaker, would be a wonderful upgrade. BUT do not expect a great deal of bass from it. When you say your center channel speaker now is distorting it is clear that you are running too much bass to it. Your receiver should be able to set it to SMALL and set a crossover no higher than 80 Hz.
That should stop it from distorting.
You will need the XL or whatever center speaker you upgrade to set as small and a crossover as well. The XXL might go a little lower, like 60, but do not expect much real deep bass from a center channel speaker.
So looking for a sub to go with this is a great idea.
I will let others address the sub.
I hope this helps, have fun with it, happy listening,
God Bless,
Wayne
Good questions and this is the place to ask them.
I would totally go with the XL or even the XXL center channel speaker, would be a wonderful upgrade. BUT do not expect a great deal of bass from it. When you say your center channel speaker now is distorting it is clear that you are running too much bass to it. Your receiver should be able to set it to SMALL and set a crossover no higher than 80 Hz.
That should stop it from distorting.
You will need the XL or whatever center speaker you upgrade to set as small and a crossover as well. The XXL might go a little lower, like 60, but do not expect much real deep bass from a center channel speaker.
So looking for a sub to go with this is a great idea.
I will let others address the sub.
I hope this helps, have fun with it, happy listening,
God Bless,
Wayne
God bless the child that's got his own.
The following user(s) said Thank You: rjohn79395, HTSME
Please Log in or Create an account to join the conversation.
- Offline
- Platinum Member
- rjohn79395
- Posts: 2410
- Thank you received: 4322
- Karma: 2
- arrow_drop_downMore arrow_drop_upLess
rjohn79395
Posted
6 years 6 months ago
Hi, Miamifins
One other thing re bass, do you have LFE leads to the T2's? For max bass from the 2's, best setting is fronts as Large, sub on in the receiver (with LFE leads to the 2's plus the sub). Maybe that's how you already have it set up? And as Wayne said, all the other speakers should be set as Small, which will also send bass below the crossovers to the fronts and sub.
Re sticking with GEt and thinking about GEt subs, if you want max punch, probably one of the Supersubs, X or XXL. All the GEt subs are well matched to the whole Gt speaker line.
Happy listening!
Rick
One other thing re bass, do you have LFE leads to the T2's? For max bass from the 2's, best setting is fronts as Large, sub on in the receiver (with LFE leads to the 2's plus the sub). Maybe that's how you already have it set up? And as Wayne said, all the other speakers should be set as Small, which will also send bass below the crossovers to the fronts and sub.
Re sticking with GEt and thinking about GEt subs, if you want max punch, probably one of the Supersubs, X or XXL. All the GEt subs are well matched to the whole Gt speaker line.
Happy listening!
Rick
5.4.4 HT speakers: T Ref fronts/LFE 1, SuperCenter Ref, T1 surrounds/LFE 2 + SuperSub XXL, HTR 7000 top fronts, HTR 8000 top rears
Zone 2 speakers; 2 Invisa 525's
AVR: Marantz SR 8015
Amp: AT525NC 5 channel
Cable/TiVo, OPPO BDP 105D, Bluesound Node 2i, Apple tv 4K streamer
48" SONY 4K OLED TV
Zone 2 speakers; 2 Invisa 525's
AVR: Marantz SR 8015
Amp: AT525NC 5 channel
Cable/TiVo, OPPO BDP 105D, Bluesound Node 2i, Apple tv 4K streamer
48" SONY 4K OLED TV
The following user(s) said Thank You: WayneWilmeth, HTSME
Please Log in or Create an account to join the conversation.
- Offline school
- Junior Member
- Posts: 21
- Thank you received: 10
- arrow_drop_downMore arrow_drop_upLess
miamifins
Posted
6 years 6 months ago
I do not and never had the LFE/ dedicated subwoofer of my amp going to my Tritons 2's. I guess I should have asked this years ago.
I am currently using a Sony SRT-DN1040. It has only two of these outputs. I am running both of these to the old Yamaha sub in he rear corner of the room. It takes both of these cables for the Yamaha to work. I am running my Tritons with red and black (banana clips) using the front left and right outputs on the receiver. I had just assumed that since these speakers plugged in to an outlet that the base was coming from the speaker (self powered) and did not rely on the receiver? These speakers have great base they just do not sound as good without the Yamaha that gives the "punch"
Please forgive me for my ignorance. So should I take the 2 subwoofer outputs on my receiver and run them to each Triton in addition to the left and right (2 wires/ each speaker) and see how that sounds? That would leave me with no outputs for the Yamaha. Have I been listing to these wrong all this time? I saw on other post most folks talking about there high end receivers/ amps maybe that is where my direction should be???
Any additional suggestion would be appreciated.
I am currently using a Sony SRT-DN1040. It has only two of these outputs. I am running both of these to the old Yamaha sub in he rear corner of the room. It takes both of these cables for the Yamaha to work. I am running my Tritons with red and black (banana clips) using the front left and right outputs on the receiver. I had just assumed that since these speakers plugged in to an outlet that the base was coming from the speaker (self powered) and did not rely on the receiver? These speakers have great base they just do not sound as good without the Yamaha that gives the "punch"
Please forgive me for my ignorance. So should I take the 2 subwoofer outputs on my receiver and run them to each Triton in addition to the left and right (2 wires/ each speaker) and see how that sounds? That would leave me with no outputs for the Yamaha. Have I been listing to these wrong all this time? I saw on other post most folks talking about there high end receivers/ amps maybe that is where my direction should be???
Any additional suggestion would be appreciated.
The following user(s) said Thank You: WayneWilmeth, rjohn79395
Please Log in or Create an account to join the conversation.
- Offline school
- Junior Member
- Posts: 21
- Thank you received: 10
- arrow_drop_downMore arrow_drop_upLess
miamifins
Posted
6 years 6 months ago
Also, just checked an the center is set to small and at 80hz. I have the 4 rear speakers at large but again never had a distortion problem with them.
Thanks again.
Thanks again.
Please Log in or Create an account to join the conversation.
- Offline
- Platinum Member
- rjohn79395
- Posts: 2410
- Thank you received: 4322
- Karma: 2
- arrow_drop_downMore arrow_drop_upLess
rjohn79395
Posted
6 years 6 months ago
Last edit: 6 years 6 months ago by rjohn79395.
info_outline
#24149
Hi
First re your two sub pre outs (it's a 7.2 receiver, with 7 amped speaker channels and 2 sub pre-outs, right?) I would try running one sub pre out/LFE to the Yamaha sub, and use a Y spitter to run the 2nd pre-out/LFE to both T2's. You could then separately adjust sub gain for the T2's and Yamaha. Just a note re why running LFE to powered Tritons can help boost bass, it's not that it gives the Triton's bass amp an extra boost, it's that lots of receivers tend to roll off the amount of LFE bass they send to front large speakers to protect either the front speakers, or the receiver's amp from overwork, but don't roll off that same bass if sent via the sub out channel.
Re crossovers, if you're getting some center speaker distortion at the current 80 HZ crossover, I'd try 100 or 120 HZ instead, which is the recommended crossover setting range for Supersats, and definitely set the surrounds as Small. You'll get more bass by sending that portion of the frequency range to the fronts and sub, and take some of the heavy lifting off the surrounds.
Hope this helps.
Rick
First re your two sub pre outs (it's a 7.2 receiver, with 7 amped speaker channels and 2 sub pre-outs, right?) I would try running one sub pre out/LFE to the Yamaha sub, and use a Y spitter to run the 2nd pre-out/LFE to both T2's. You could then separately adjust sub gain for the T2's and Yamaha. Just a note re why running LFE to powered Tritons can help boost bass, it's not that it gives the Triton's bass amp an extra boost, it's that lots of receivers tend to roll off the amount of LFE bass they send to front large speakers to protect either the front speakers, or the receiver's amp from overwork, but don't roll off that same bass if sent via the sub out channel.
Re crossovers, if you're getting some center speaker distortion at the current 80 HZ crossover, I'd try 100 or 120 HZ instead, which is the recommended crossover setting range for Supersats, and definitely set the surrounds as Small. You'll get more bass by sending that portion of the frequency range to the fronts and sub, and take some of the heavy lifting off the surrounds.
Hope this helps.
Rick
5.4.4 HT speakers: T Ref fronts/LFE 1, SuperCenter Ref, T1 surrounds/LFE 2 + SuperSub XXL, HTR 7000 top fronts, HTR 8000 top rears
Zone 2 speakers; 2 Invisa 525's
AVR: Marantz SR 8015
Amp: AT525NC 5 channel
Cable/TiVo, OPPO BDP 105D, Bluesound Node 2i, Apple tv 4K streamer
48" SONY 4K OLED TV
Zone 2 speakers; 2 Invisa 525's
AVR: Marantz SR 8015
Amp: AT525NC 5 channel
Cable/TiVo, OPPO BDP 105D, Bluesound Node 2i, Apple tv 4K streamer
48" SONY 4K OLED TV
The following user(s) said Thank You: WayneWilmeth, HTSME
Please Log in or Create an account to join the conversation.
Moderators: Moderator
- home Forum
- arrow_forward
- Support
- arrow_forward
- Triton Series
- arrow_forward
- I am looking to upgrade
menu
close
Menu
Account
-
- FS: Golden Ear SuperSat 50C -Center Channel $375
- In Marketplace / For Sale/Trade
- by alexseentt
- 1 day 1 hour ago
-
- Triton One Fuse change
- In Advanced Topics / DIY, Mods and Tweaks
- by TonB
- 6 days 2 hours ago
-
- Home Theater plan - review
- In Advanced Topics / Music, Home Theater, Gaming
- by Moderator
- 1 week 21 hours ago
-
- What to set triton speakers to during Dirac Live m...
- In Triton Series / Triton Towers
- by Moderator
- 1 week 21 hours ago
-
- 4 or 8 ohms
- In Getting Started / Basic Hookup and Wiring Questions
- by GDHAL
- 1 week 2 days ago
search
close
person_outline
arrow_back