lightbulb Help on filling out my Theater speakers

  • CRRobert's Avatar Offline school
  • Junior Member
  • Junior Member
    • Posts: 31
    • Thank you received: 49
  • arrow_drop_downMore arrow_drop_upLess
CRRobert Posted 7 years 9 months ago
#17548
A little back on topic, but was planning on the Aons in the back, this is what had talked to my dealer about. I can always put the SS50 in the back and see how they sound first. I do have a little more room in the back for the depth of the Aons', not so much on the side surrounds.

I still need to talk to him about the HTR7000 vs the SAT 3's on the ceiling. From another thread, looks like 1.7 cu ft of volume if I build a box for the ceilings..
Triton 3+
Supercenter XXL
HTR7000(5)
FF4
SS50
The following user(s) said Thank You: WayneWilmeth, T Cobe

Please Log in or Create an account to join the conversation.

  • CRRobert's Avatar Offline school
  • Junior Member
  • Junior Member
    • Posts: 31
    • Thank you received: 49
  • arrow_drop_downMore arrow_drop_upLess
CRRobert Posted 7 years 9 months ago
#17637
So talked with my dealer, we are going to go with the HTR7000 and box them. Wanted to get as much towards full range as possible.

I did have a follow question, and maybe Moderator Dude can help, but I recall reading in some reviews, the GET had put together boxes for the shows, and lent to a reviewer. Is there anyway to get information on how I could make the same?
Triton 3+
Supercenter XXL
HTR7000(5)
FF4
SS50
The following user(s) said Thank You: WayneWilmeth, rjohn79395, T Cobe

Please Log in or Create an account to join the conversation.

  • Moderator's Avatar Offline
  • Moderator
  • Moderator
    • Posts: 3350
    • Thank you received: 3419
    • Karma: 19
  • arrow_drop_downMore arrow_drop_upLess
Moderator Posted 7 years 9 months ago
#17737

CRRobert wrote: I did have a follow question, and maybe Moderator Dude can help, but I recall reading in some reviews, the GET had put together boxes for the shows, and lent to a reviewer. Is there anyway to get information on how I could make the same?


These were rather specific as they had to slip into a ceiling cutout, rather than be above the ceiling. That said, we do have rough mechanical drawings of the boxes - if you'd like them, contact us at This email address is being protected from spambots. You need JavaScript enabled to view it. and they can round up the drawing for you.
The following user(s) said Thank You: WayneWilmeth, T Cobe

Please Log in or Create an account to join the conversation.

Moderators: Moderator
menu
close
Menu
person_outline
arrow_back
You are here: Home Forum Getting Started Buying Advice Help on filling out my Theater speakers