T Cobe
Posted
7 years 10 months ago
Jim,
Welcome to the forum and congrats on the great setup! You're well on you're way towards great sound. Just a little fine tuning and some patience now.
During the ARC process, you have the opportunity to set the crossover frequencies for each speaker. Make sure you set the T2+s to full range or flat, and all other speakers to 80 Hz. If you have nulls or other acoustic issues in your room, sometimes ARC sets some strange crossover frequencies. As Moderator Dude said, you can adjust the frequency at which to stop correcting room acoustics. 500 Hz is a great place to start depending again on any issues you may be having. I have a number of issues in my room and have settled on correcting up to 2,000 Hz, but I plan to go back and play with placement and rerun ARC.
Don't worry about boomy sound. ARC does a great job cleaning up the low frequencies. You can play around with the settings a great deal and change the play back mode for music. Your Tritons and Anthem AVR give you a great deal of flexibility. Keep at it until you get things where you like them. It shouldn't take too long. Your dealer will probably be a great resource to talk you through some of this if you run into additional challenges. Good luck and let us know if we can answer any more questions.
Cheers,
T Cobe
Speakers: Triton One L/R, SCXL, Aon 3 Surr/Back, HTR-7000 Height
Pre/Pro/AVR: Anthem AVM 60, Emotiva XSP-1
Amps: Emotiva XPA-5(2), Emotiva XPA-1L (2)
Sources: Oppo BDP-103D, Emotiva ERC-3, PS4, Pioneer PLX-1000 w/Ortofon 2M Bronze
Display: Epson 6030 UB, Elite Screens 110" Sable
Please Log in or Create an account to join the conversation.