I would like to mount my array below the TV on the wall, but be able to tilt it upwards a tad to ear level. Any suggestions/mounting brackets for this?

Brackets will pull it away from the wall. If that's OK, use our SuperSwivel (2 of them) to mount the 3D Array below the wall mounted TV and angled up. If you want it to be flush to the wall, you will need to use the provided keyhole slots and get a little clever with some pads placed on the lower back of the bar to create some tilt up.

Thank you for the fast response.
Could you tell me the center to center dimensions f the 1/4-20 mounts and the keyhole slots? They are not shown on the cut sheet. Regards, Jeff

On the 3D Array X the keyhole centers are 20-7/16" apart. Threaded Inserts are 14-15/16" apart. Both are centered on the rear panel. (We suggest NOT making any holes without using the template included with the speaker.)

I'm sorry. This unit is the XL model. Is it the same? Regards.

No.

Keyhole centers are 22-7/16" and threaded insert centers are 10-15/16". Same caveat.