lightbulb Help with MPX & 650s setup for two rows

  • telliott's Avatar Offline school
  • New Member
  • New Member
    • Posts: 6
    • Thank you received: 3
  • arrow_drop_downMore arrow_drop_upLess
telliott Posted 5 years 1 week ago
#27374
Thanks for all the advice, going to pull the trigger today on my purchase of all the surrounds and overheads today. Decided I'd go with only 4 overheads due to small'ish size of room. Thinking about placing an HTR 7Ks as my rear surrounds on back of the side walls so its on same plane as side surrounds and not competing with the atmos overheads in the back.

drive.google.com/file/d/1yK9T7IpxO6cnuXE...3sP/view?usp=sharing

Last few questions I'd really appreciate your expertise and advice on:

- Is use of H7Ks ok for my atmos given my config? TRR & TRL need to be up against a back wall so assumed could be ideal but not sure with the 2 rows and where they are positioned.

- Is use of H7Ks ok for the rears, but placed 5' up (for 10' ceiling) on back side walls? I'd rotate so the cone toes in towards the MLP & thought was to get them on same plane to not compete with TRR & TRL.

- Would it be better to use a MPX in that rear position on back side walls instead? They would be very close to the back wall and not sure how that would be. Not much separation to the SR & SL either.

- What is the angle of the drivers in the MPX vs H7K?

Please Log in or Create an account to join the conversation.

  • Moderator's Avatar Offline
  • Moderator
  • Moderator
    • Posts: 3350
    • Thank you received: 3419
    • Karma: 19
  • arrow_drop_downMore arrow_drop_upLess
Moderator Posted 5 years 1 week ago
#27375

telliott wrote: Thanks for all the advice, going to pull the trigger today on my purchase of all the surrounds and overheads today. Decided I'd go with only 4 overheads due to small'ish size of room. Thinking about placing an HTR 7Ks as my rear surrounds on back of the side walls so its on same plane as side surrounds and not competing with the atmos overheads in the back.

drive.google.com/file/d/1yK9T7IpxO6cnuXE...3sP/view?usp=sharing

Last few questions I'd really appreciate your expertise and advice on:

- Is use of H7Ks ok for my atmos given my config? TRR & TRL need to be up against a back wall so assumed could be ideal but not sure with the 2 rows and where they are positioned.

- Is use of H7Ks ok for the rears, but placed 5' up (for 10' ceiling) on back side walls? I'd rotate so the cone toes in towards the MLP & thought was to get them on same plane to not compete with TRR & TRL.

- Would it be better to use a MPX in that rear position on back side walls instead? They would be very close to the back wall and not sure how that would be. Not much separation to the SR & SL either.

- What is the angle of the drivers in the MPX vs H7K?


The HTR-7000 is too deep to sit standard interior walls. It is intended for ceiling use only.
The following user(s) said Thank You: telliott

Please Log in or Create an account to join the conversation.

Moderators: Moderator
menu
close
Menu
person_outline
arrow_back
You are here: Home Forum Getting Started Buying Advice Help with MPX & 650s setup for two rows